Call us for more information on: 0870 241 06 02 or email us at: sales@axess4all.com
To find out more about our lifts, call us for a chat on 0116 274 4040 or email sales@axess4all.com
Download ![]()
Corporate Brochure
Download 1.9mb PDF

The A1000 Incline Stair Lift can be wall or stanchion post mounted to almost any staircase. With the standard or a special size platform the units can be adapted to fit the majority of applications which include stairs with mid landings and the requirement for the unit to travel around a corner or bend.
With simple and easy to use push buttons and joystick, the A1000 Incline Stair Lift is a reliable and cost effective solution to restricted access via an existing stair case.
To operate the unit, the wheelchair users would press the unfold button on the remote control station and the platform will then automatically unfold ready to be used.
The wheelchair users can then move themselves onto the platform.
By pressing the joystick on the platform the safety arms and folding ramps then postition themselves to secure the users on the platform. The wheelchair user can then push the joystick in the direction of travel and the unit will move in the required direction.
Once the unit has reached the required level, one of the retaining arms and ramp will unfold to allow exit from the unit.
The users can stop the travel of the unit at any time within the travel. The unit will automatically stop if it comes into contact with any obstacle on its travel.
The A1000 Complies with all National and European codes and can help building owners meet the legislative requirements of the DDA.
| Platform Size: |
1000mm long x 800mm wide or special sizes available on request
|
| Speed: |
0.08m/sec
|
| Power Requirement: | 1 phase 240 volts 13 amp |
| Rated Load: |
Wheelchair passenger 225kg
|
| Headroom: |
Max 2200mm
|
| Configuration: |
Through - adjacent
|
| Controls: |
Constant pressure push buttons or joystick
|
All drawings are in PDF format and approximately 250k![]()