Axess 4 All - A Cibes Lift Group Company

Find out more

To find out more about our lifts, call us for a chat on 0116 274 4040 or email sales@axess4all.com

Download
Corporate Brochure
Download 1.9mb PDF

MOODY Cert no 1071

The Microlift service lift range 50 & 100

Wide Range

A range of 50kg and 100kg models cater for every lifting requirement – from food, laundry and documents to beer crates and barrels, small trolleys and industrial equipment. Additional models cater for capacities up to 1,500kg

Quick, Simple Installation

The Service Hoist operates inside a rapidly-erected, structure supported frame which is easy to install and requires minimal builder’s work. No separate motor room or load-bearing shaft is needed, which helps to keep costs down.

Available from Stock

Most models are normally available from stock, which means that a Service Hoist can be installed and working within a few weeks, depending on the building work.

Easy Handling

Up to three-way entry on every floor to give most convenient access positions.

Proven Quality & Reliability

Over 60,000 installations throughout the world are convincing proof of Microlift engineering quality and reliability.

Choice of Finishes

The finish of the lift car and rise and fall shutters can be tough grey baked enamel or stainless steel.

Technical Specifications

Model	DD50	50A	50B	50C	100A	100A	100B	100B
Shutters	RF	RF	RF	RF	RF	HD	RF	HD
Capacity	50kg	50kg	50kg	50kg	100kg	100kg	100kg	100kg
Car
Width	510	545	520	620	720	720	820	820
Depth	320	420	520	620	720	720	820	820
Height	800	800	800	800	1000	1000	1200	1200
Shaft
Width	725	820	800	900	1000	1000	1100	1100
Depth	520	640	800	900	1000	1000	1100	1100
Entrance
Width	320*	420*	420	520	620	650***	720	750***
Height	770	770	770	770	970	1000***	1170	1200***
Serving Height (Variable)	800	800	800	800	800	Floor Level	800	Floor Level
Pit Depth	-	-	-	-	-	350**	-	350**
Head Room	2600	2600	2600	2600	2800	2000	3000	2200

Note:
Shutters
RF=Rise and Fall, HD=With Hinged Door serving at floor level

* Entrance position ‘B’ is not available on the DD50 model but can be provided on the 50A model with a reduced entrance width of 320mm.

** A reduction in the pit depth is possible – please contact us for details.

*** ENTRANCE DIMENSIONS – These are reduced as follows if a collapsible picket gate is fitted to the lift car:-
100A 550mm Wide 865mm High
100B 650mm Wide 1065mm High

Note:
Some of the above dimensions can be varied to suit your individual requirements – by modification of stock models or by special manufacture – please contact us for details.

Key Features

Pubs, Hotels, Clubs
Restaurants
Offices and Factories
Shops / Retail
Private Homes